Birch Veneer & Flooring

SEAMLESS VENEER EDGING

We offer veneer edgings for all areas of application and individual customer specifications, from classics such as thin and thick veneer edges to wrapping veneers to 3D structured surfaces with interesting texture and visual features.

WE CAN SUPPLY THE FOLLOWING PRODUCT CATEGORIES

- - Thin veneer edging

- - The Curve

- - PUR lamination

- - Thick veneer edging

- - End-grain edging

- - 3D structured surfaces
    - .

- - Lacquered surfaces
    - - .
        
        .
- - Bamboo

Thin Veneer Edging: THE CLASSICS

The classic in our extensive product range

A wide variety of finishing options enable an exact adjustment to your production parameters.

We deliver individual dimensions according to your requests and requirements: In continuous rolls or as fixed dimensions, with butt joint or inductively readable aluminium tape.

Standard widths and finishes are available in many types of wood. These include hot-melt adhesive pre-coating or fleece-reinforced backing, each with a paintable, sanded surface.

We always have a large selection of reconstituted veneer decors in stock. They are characterized by a highly consistent structure and are available as thin veneer and thick veneer with all common finishes.

Types of finishing

• Fleece
• PUR fleece
• Hot melt adhesive pre-coating
• SSK splitter protection coating
• Surface sanded
• Calibration sanding down to 0,30 mm
• Brushed or textured surfaces
• UV lacquering systems for straight edging
• Hydro-UV lacquering systems for flexible edging
• Can adjust colour and gloss level .

LACQUERED SURFACES

Always strike the right shade

Surface-finished veneer edgings enable efficient production and ensure an improved solvent balance for the processor.

We offer a variety of different lacquering systems and surfaces. State-of-the-art technologies and environmentally friendly UV and hydro lacquering systems enable exact production according to colour and gloss level samples. The choice of these systems is made individually.

Our fully glued finger joint offers many advantages for the processor, especially in the area of finished surfaces:

No breaking of the joints

Higher tensile strength of the joints

No penetration of paint or stain into the joints

Best possible preserved structure in the joint area

The Curve

Perfect for application at the limit

A multi-layered thick veneer edging so flexible that it opens up new dimensions in the processing around tight radii.

It differs from conventional thick veneer edgings by way of its special setup. This feature enables a processor to run a thick veneer edging around even the tightest radii (e.g. radius 20) in just one pass on a processing centre. This ensures significant time savings and is thus also clearly beneficial in terms of economy and efficiency.

The Curve unfolds its special qualities when it comes to cover edges of workpieces with small radii on proccessing centres. This is what makes this thick veneer edging so attractive for the demanding user.

PUR lamination

For application in specialty areas

The Heitz PUR lamination in an innovative system with the most current PUR technology. In addition to the established fleece lamination, this process also enables new material composite systems. The most important areas of application here are profile wrapping and edge banding.

The advantages of PUR lamination are: excellent water resistance, best wrapping flexibility, high temperature resistance, good cold flexibility, highest bond strength and a good chemical resistance.

Further information and possible processing areas, you can find in our productsheet.

3D Structured Surfaces

Design accents for individualist

In addition to the brushed veneer edges established on the market, we offer a collection of pure, 3D structured veneer surfaces.

The different versions can be represented on all commercially available veneers and enhance the visual perception of the veneer. We are not dependent on the use of special veneers or complex processing techniques. This enables the structured surfaces to be used over a wide range at a very appealing price level.

This special surface treatment can be implemented for the entire product range.

Types of structures:

• Rough cut
• Sandblast
• Wave
• Wormhole
• Croco Nero
• Croco

End-grain edging

High Quality Look

End-grain edgings visually correspond to a log cut across the length with visible annual rings. Our end-grain edging creates an attractive edge look on the workpiece, very close to the look of real sawn timber.

- - .

Thickness: approx. 1.2 mm
Surface: sanded
Slat width: variable, from 45 to 150 mm
Widths: 18 – 200 mm
Roll length: 50 / 100 m

- - .

End-grain edgings are available in different types of wood.

Thick Veneer Edging

Multilayered, Safe, and Flexible

We have been producing multilayered thick veneer edging in rolls since 1979. For this purpose, veneers are glued in several layers in high-performance presses, up to a thickness of 5 mm. The multilayer construction with finger-jointed middle layers ensures the highest possible flexibility. All of the continuous thick veneer edgings we produce are, without exception, glued with PVAc glue. This guarantees excellent properties in terms of flexibility and millability.

Our complete range includes thick veneer edgings with extensive finishing options – including finished surfaces according to individual customer specifications. We also have a wide range of standard wood types and dimensions available in stock.

Alternatively, we also offer thick veneer fixed sizes in lengths of up to 3,100 mm and thicknesses of up to 60 mm.

Whatever you need: We’ll meet your individual requirements.

Bamboo

A material with a bright future

Its extraordinary characteristics have made it an industrial product in high demand. As a veneer, bamboo shows its naturally warm appearance and its exclusive charisma, and is therefore more than just an alternative to the usual types of wood.

Bamboo veneer and edging material is available as wide or narrow slats in

Bamboo light

Bamboo caramel

It is a rapidly renewable raw material, therefore it is very valuable from an ecological point of view. It can be harvested every 4 to 5 years without harming the stand and comes from sutainably forestry.

Sales team: Laminates & Boards

Please contact our sales team for further information and interest in our products. We look forward to receiving your inquiry and will do our very best to build a good customer relationship with your company, following the German saying “the customer is king”! sales1@gtv-global.com